LA215 UK amplifier only
£69.00 ex vat
£82.80 inc vat
The LA215 Loop Amplifier is an enhanced microprocessor controlled loop amplifier with outstanding sound quality designed to be used with modern audio and video products to transmit the sound direct to your hearing aid.
Your hearing aid must be switched to the T position to use the loop system. You can also enjoy the benefits of the loop amplifier by simply plugging a set of headphones into the headphone socket on the front of the amplifier. For best results connect the amplifier directly to your TV or other sound source using a direct connection lead kit.
- Rotary Volume and Tone Controls
- Loop Level Indicator
- Microphone Sensitivity Control
- Priority Function Control
- Automatic Gain Control
- Line Input Selector
- On/Off Mains Switch
- Blue LED Function Indicators
- Red LED Level Indicator
- 2 Microphone Inputs
- 2 Line inputs
If you choose this system you will receive:
- LA215 amplifier
- 13 amp mains lead and plug
- Stand
- Operating Instructions
Power Supply:
- 95-265v 50-60Hz AC 20VA Max via Fig 8 mains lead.
Controls:
- Rotary VOLUME control to vary the output level.
- Rotary TONE control to vary the output tone.
- ON/OFF power push button switch.
- AGC, PRIORITY, MIC and LINE functions
Input connections:
- 2x microphone inputs A/B. 3.5mm mono jack plug.
- DC powered for electret microphones.
- 2x Aux In Left/Right line inputs. Phono/RCA sockets.
For direct connection to a TV sound output or other
audio source via SCART or other suitable socket.
Output connections:
- Push grip connectors for loop cable or loop pad
(Labelled: Loop Cable). Loop will give full output
with loop resistance between 0.5 and 1.5 Ohms. - Headphone output • 3.5mm stereo jack for headphones (Phones) 8-60 Ohms.
Loop output:
- 2.85A output current @ 100-5kHz. Sufficient to meet
BS EN 60118-4:2006 in a loop not exceeding
6.25m(20ft) in width for most domestic situations
(approx 50m2). - Loop cable: Single turn loop cable 37m (120ft) 24/0.2 (0.75mm2) single core PVC
insulated cable and cable clips. Minimum cable
length 11m = 0.5 Ohms.
Indicators:
- Blue Light Emitting Diode (LED) for Power On
indication and function buttons - Red Light Emitting Diode (LED) for Loop Level Indication
For instructions please click on the PDF links below:
Overview
The LA215 Loop Amplifier is an enhanced microprocessor controlled loop amplifier with outstanding sound quality designed to be used with modern audio and video products to transmit the sound direct to your hearing aid.
Your hearing aid must be switched to the T position to use the loop system. You can also enjoy the benefits of the loop amplifier by simply plugging a set of headphones into the headphone socket on the front of the amplifier. For best results connect the amplifier directly to your TV or other sound source using a direct connection lead kit.
Features
- Rotary Volume and Tone Controls
- Loop Level Indicator
- Microphone Sensitivity Control
- Priority Function Control
- Automatic Gain Control
- Line Input Selector
- On/Off Mains Switch
- Blue LED Function Indicators
- Red LED Level Indicator
- 2 Microphone Inputs
- 2 Line inputs
If you choose this system you will receive:
- LA215 amplifier
- 13 amp mains lead and plug
- Stand
- Operating Instructions
Technical Information
Power Supply:
- 95-265v 50-60Hz AC 20VA Max via Fig 8 mains lead.
Controls:
- Rotary VOLUME control to vary the output level.
- Rotary TONE control to vary the output tone.
- ON/OFF power push button switch.
- AGC, PRIORITY, MIC and LINE functions
Input connections:
- 2x microphone inputs A/B. 3.5mm mono jack plug.
- DC powered for electret microphones.
- 2x Aux In Left/Right line inputs. Phono/RCA sockets.
For direct connection to a TV sound output or other
audio source via SCART or other suitable socket.
Output connections:
- Push grip connectors for loop cable or loop pad
(Labelled: Loop Cable). Loop will give full output
with loop resistance between 0.5 and 1.5 Ohms. - Headphone output • 3.5mm stereo jack for headphones (Phones) 8-60 Ohms.
Loop output:
- 2.85A output current @ 100-5kHz. Sufficient to meet
BS EN 60118-4:2006 in a loop not exceeding
6.25m(20ft) in width for most domestic situations
(approx 50m2). - Loop cable: Single turn loop cable 37m (120ft) 24/0.2 (0.75mm2) single core PVC
insulated cable and cable clips. Minimum cable
length 11m = 0.5 Ohms.
Indicators:
- Blue Light Emitting Diode (LED) for Power On
indication and function buttons - Red Light Emitting Diode (LED) for Loop Level Indication
Instructions
For instructions please click on the PDF links below:
